Fill Low Tack LDPE Protective Film 20MIC-150MIC Thickness 5-500G/25MM Adhesion

Basic Information
Place of Origin: CHINA
Brand Name: SHIRE
Certification: SGS MSDS
Model Number: Shire-190171
Minimum Order Quantity: Negotiate
Price: Negotiate
Packaging Details: Paper/Pvc/PP Packing core +Bubble Film+Carton+Pallet
Delivery Time: 15 Days After get the Deposit
Payment Terms: L/C, T/T, Western Union
Supply Ability: 300,000 Square Meters per Day
Contact Now

Stainless Steel Protective Film Low Tack Protection Film for stainless surface







Usage Provide a protective barrier to scratch, mark, damage and dirt at the processof bending,pressing, punching, cutting, drilling, milling, roll forming,transportation and installation.
Base Material Polyethylene (PE)
Glue Water-based acrylic / solvent-based acrylic / natural rubber
Color Transparent, blue, white, black and white, green and so on.
Thickness 30-150 microns Widely used 35/45/50/70/80/100 microns
Width 100-2000 mm Widely used 1000/1100/1220/1250 mm
Length 100-2000 m Widely used 200m, 500m, 100m
180˚ Peel Strength 20-500 g/25mm Widely used 150/200/250/350 g/25mm
Tensile Strength Trasv> 8N/25mm
Longi> 15N/25mm
Elongation Trasv> 300%
Longi> 180%
Print Up to 5 colors




Our Advantages

♥ We are verified company by TUV SUD

♥ Quality customizable product with factory directly price,cheaper

♥ Self adhesive film manufactured by co-extrusion.

♥ Excellent elongation and tensile strength, which won’t break at the process of deep drawing.

♥ SGS report which means our surface film for protection is environmental friendly,pollution-free.



Fill Low Tack LDPE Protective Film  20MIC-150MIC Thickness 5-500G/25MM Adhesion

Types of Stainless Steel Protection Films

Adhesive Type – This is the product identification number of the adhesiveTack – Measured in ounces per lateral inch, this defines the level of “stickiness” of a particular adhesive. Because there are many variables at play, the tack level of most adhesives will be expressed as a range of values rather than a single, specific measurement.

Material – This identifies the product substrate, itself (type of plastic / paper).

This table is designed to assist you in selecting which Surface Armor products you might want to evaluate for your specific application. As there are many variables involved in the relationship between a protective film and the surface it is applied to, it is usually a good idea to test two or more samples on your specific surface(s) in all phases of the intended surface protection life cycle. This guide can serve as a starting point when requesting samples.

Along the left side of the table you will find various Surface Armor tapes and films listed by their adhesive type, tack level and the material these products are made from.

The top of the table lists the various surfaces to be protected, grouped by classification.



Contact Details

WhatsApp : 008615257328825